Fingertip Pulse Oximeter Atom AT-875 Blood Oxygen Saturation Monitor

Features of Pulse Oximeter Atom AT-975 Blood Oxygen Saturation and pulse rate monitor
Pulse oximeter Atom designed for everyone’s health with accurate and easy reading.
Large front screen display
Four directional display
Double layer anti skid pad made of silicon is more comfort to measuring
3 level brightness
Auto Alarm
One button operation
Rapid measurement
Highly accurate
Portable and easy to carry
Precautions for use of Pulse Oximeter Atom
Do not use the pulse oximeter together with MRI or CT equipment.
Explosion hazard: Do not use the pulse oximeter in an explosive atmosphere.
The pulse oximeter is intended only as an adjunct in patient assessment. Doctors should make diagnosis in conjunction with clinical manifestation and symptoms
Check the pulse oximeter sensor application site frequently to make sure that the circulation and skin Integrality of patient are under good condition.
Do not stretch the adhesive tape while applying the pulse oximeter sensor. This may cause inaccurate reading or skin blisters.
Please read the manual carefully before your operation.
The pulse oximeter has no SpO2 prompt, it is not for continuous monitoring.
Prolonged use or the patient’s condition may require changing the sensor site periodically. Change sensor site and check skin integrality circulatory status, and correct alignment at least every 2 hours.
Inaccurate measurements may be caused by autoclaving, ethylene oxide sterilizing, or immersing the sensors in liquid.
Significant levels of dysfunctional hemoglobins (such as carboxyl- hemoglobin or methemoglobin) may cause inaccurate reading.
Intravascular dyes such as indocyanine green or methylene blue may cause inaccurate reading.
SpO2 measurements may be adversely affected in the presence of high ambient light. Please shield the sensor area (with a surgical towel or direct sunlight, for example) if it is necessary.
Unexpected action may cause inaccurate reading.
Medical signal with high frequency or interference caused by defibrillator may lead to inaccurate reading.
Venous pulsations may cause Inaccurate reading.
It may cause inaccurate reading when the positions of sensor and blood pressure cuff are on the same arterial catheter or intravascular line.
Hypotension, severe vasoconstriction, severe anemia, or hypothermia may cause inaccurate reading.
It may cause inaccurate reading by giving use of cardiotonic to patient after his cardiac arrest or when he is in quiver.
Bright nail or painted nail may cause inaccurate SpO2 reading.