ATOM AT-600 Blood Glucose Monitor Best Quality Glucometer

Overview

Glucometer Price in Pakistan

The Cheapest Glucometers in Pakistan Accu-chek Active Blood Glucose Meter Accuchek Instant Glucose Meter Lifecheck Glucometer INSTRUCTIONS TO FOLLOW BEFORE TH USE OF GLUCOMETER Severe dehydration and excessive water loss may cause readings which are lower than actual values. If you believe you are suffering from severe dehydration, consult a healthcare professional immediately. If your blood glucose results are lower or higher than usual, and you do not have any symptoms of illness, first repeat the test. If you have symptoms or continue to get results which are higher or lower than usual, follow the treatment advice of your healthcare professional. Use only fresh whole blood samples to test your blood glucose. Using other substances will lead to incorrect results. If you are experiencing symptoms that are inconsistent with your blood glucose test results and you have followed all the instructions given in this owner's manual, contact your healthcare professional. We do not recommend using this product on severely hypotensive individuals or patients in shock. Please consult the healthcare professional before use. The measurement unit used for indicating the concentration of blood or plasma glucose can either have a weight dimension (mg/ dL) or a molarity (mmol / L). The approximate calculation rule for conversion of mg / d *

L in mmol / L is

HOW TO USE THE ATOM GLUCOMETER? To perform a blood glucose test on Atom Glucometer, you have to follow the steps given below:

Total Time Needed

5 minutes

Total Cost

30

Rupees Required Tools

- Lancing Device - Lancets - Spirit swabs Things Needed? - Atom Glucometer - Atom Strips Follow the steps carefully to perform a blood glucose test.

Step 1

Wash your hands Wash and dry your hands before starting.

Step 2

Prepare the Lancing Device Prepare the lancing device by inserting the lancet in the lancing device by following the procedure shown in the figure.

Step 3

Insert the Test strip to turn on the meter After inserting the strip, wait for the meter to display blood drop sign

Step 4

Obtaining the blood sample Use the pre-set lancing device to puncture the desired site. Wipe off the first appeared drop of blood with a clean cotton swab. The size of the drop should be at least as big as (actual size), which is 0.5 microliter (µL) of volume. Gently squeeze the punctured area to obtain another drop of blood. Be careful NOT to smear the blood sample.

Step 5

Apply the sample Gently apply the drop of blood to the absorbent hole of the test strip at a tilted angle. Confirmation window should be completely filled if enough blood sample has been applied. Do NOT remove your finger until you hear a beep sound.

Step 6

Read the Result The result of your blood glucose test will appear after the meter counts down to 0. The blood glucose result will be stored in the memory automatically.

Step 7

Eject the used Test Strip Eject the test strip by pushing the eject button on the side. Use a sharp bin to dispose of used test strips. The meter will switch itself off automatically